Skip to content 
Ready to trade another shingle cycle for a roof that outlasts the mortgage? Call our Creve Coeur office at (314) 618-8888 or book a free driveway inspection this week. We will walk your roof planes and give you real numbers on the same visit.
Homeowners along Olive Boulevard and through Villages of Willowbrooke keep asking the same question every spring: is standing seam metal roofing in Creve Coeur worth the jump from asphalt? For a home built between 1955 and 1975 with wide overhangs and long low-slope planes, the honest answer is yes — a 24-gauge standing seam roof runs 50-plus years, shrugs off the baseball-size hail this ZIP took in May 2025, and stops the ponding failures that eat mid-century shingle sections alive. Talk to Top Quality Exteriors before your next claim.
We install snap-lock and mechanical-lock panels in 24-gauge Galvalume, aluminum, and steel with a Kynar 500 finish, so the color on your Sheffield or Sherwyn Lane roof still matches the trim in year 30. Pairing metal on the low-slope planes with asphalt shingles in Creve Coeur on the steep-pitch sections keeps the budget sane while each surface gets the material it actually needs. Every panel run is pulled under the Creve Coeur permit portal, inspected against 2021 IRC re-roof code, and backed by our 36-month workmanship warranty.
Snap-lock, mechanical-lock, and exposed-fastener panels each have a place on a Creve Coeur roof, and picking the wrong one is what turns a 50-year investment into a 15-year headache. On the wide low-slope planes of a mid-century ranch off Ballas Road, we spec a 24-gauge mechanical-lock standing seam with 1.75-inch ribs so the seam clears any ponding water and the panel hides every fastener from UV and hail. On the steep Georgian rooflines around Sherwyn Lane and the Westwood Country Club side of town, a snap-lock system in Kynar 500 finish handles the long ridge runs and multiple valleys without oil-canning across the big planes. We tie every metal run into new ice and water shield, kick-out flashing, and continuous ridge vents so the roof meets the R-38 attic insulation and ventilation ratios the Creve Coeur inspector checks against. If your home also needs slate roofing in Creve Coeur on a dormer or tower detail, we sequence both trades in a single mobilization.
A standing seam roof is one of the biggest single upgrades a Creve Coeur home ever gets, so we don’t hand you a mystery. Here is exactly how we walk your project from the first driveway visit to the final panel lock and city sign-off.
We meet you on the driveway and walk the roof planes together. I flag every valley, seam, and low-slope section a metal system solves. You get all the findings on the same visit.
I price the panel gauge, profile, color, and flashing package for your roof. You see line items, not a lump sum, across three budget tiers. We match the scope to your insurance.
Once you sign, we lock in panel color and profile with the mill that week. Kynar 500 coil is coated and rolled to your exact panel lengths. Delivery is timed to the install day.
Crew tears off the old roof to the deck and swaps rotted sheathing on sight. New ice and water shield, felt, and clips go down before a panel. We lock, seam, and flash every plane.
I walk the finished roof with you and the Creve Coeur inspector, not just one. Every ridge, valley, and penetration gets a final photo for your file. Warranty starts that day.
Top Quality Exteriors was founded in 2022, but the crew behind it brings more than seven years of industry experience installing standing seam and architectural metal across the St. Louis metro. Our office sits on Olive Boulevard, the same street as many of the homes we roof, which means the truck reaches your driveway in Villages of Willowbrooke or off Ballas Road in minutes, not hours. That proximity matters when a May storm drops baseball-size hail on your block.
We are a BBB Accredited Business with an A+ rating, an Owens Corning Preferred Contractor on the shingle side of our work, and fully licensed and insured in both Missouri and Illinois. Every metal project is pulled under the Creve Coeur permit portal, meets 2021 IRC Class A fire and ASTM D7158 wind ratings, and gets inspected by the city building division before we invoice. Homeowners who compare us to storm-chaser crews notice the paperwork gap first.
Straight numbers first: a metal roof in Creve Coeur runs between $6.10 and $13 per square foot installed, so a typical 2,400-square-foot ranch off Olive Boulevard lands between $14,600 and $31,200 depending on panel gauge, profile, and color choice. A high-end mechanical-lock standing seam job on a large Sherwyn Lane custom home with multiple valleys, long ridge runs, and snow guards can push $33,000 once we factor in extra flashing and cut panels.
The value math is where metal wins in this ZIP. An asphalt roof needs full replacement every 18 to 22 years here, so over the 50-plus year life of one standing seam roof you would replace shingles two or three times. Add Class A fire and impact-rated insurance discounts, resale lift, and financing through Hearth or GreenSky, and metal beats premium asphalt on cost per year. Owners on Olive get the same math on our commercial roofing in Creve Coeur.
Every credential we carry is a commitment to quality, safety, and your peace of mind — on every project, in every state we serve.
