Skip to content 
Choosing a metal roof is choosing to stop thinking about the roof for a generation. Call us at (314) 618-8888 and we’ll walk every slope on your Kirkwood home and hand you a written scope and honest number. No pressure, no surprises.
A metal roof is a 50-year decision, and Kirkwood’s mix of steep Victorian gables, Tudor Revival dormers, and mid-century ranches makes that choice matter more than it does in a look-alike subdivision full of the same shingle. If you’re weighing standing seam metal roofing in Kirkwood against another architectural asphalt tear-off, the talk shifts fast to lifespan, wind rating, and how a Kynar 500 finish will read from the street. Top Quality Exteriors installs 24-gauge standing seam and snap-lock panels across the city’s historic districts and post-war belt.
A well-built standing seam roof carries a 50-year service life, a Class 4 impact rating for hail, and wind numbers that shrug off the 60-to-80 mph gusts riding through the Meramec Highlands with every spring squall line. Compared to an architectural shingle you’ll tear off around year 20, the up-front premium buys two roofs’ worth of runway, plus a lighter dead load on framing that older Kirkwood homes were never designed to carry twice. See our commercial roofing in Kirkwood for low-slope panel work.
Kirkwood’s roofs are not one shape. Downtown and the Jefferson-Argonne blocks hold multi-gable Victorians with dormers, valleys, and the occasional turret; East Monroe and North Taylor sit on the same historic register. A mile south, Craigwoods and Greentree run to 1955 ranches with wide eaves and long, low-slope wings. Standing seam and snap-lock panels bend to both stories: on a steep Tudor we run 24-gauge steel with mechanical-lock seams for tight radius work around dormer cheeks and turret pans, and on a ranch the same panel installs across a long uninterrupted plane in a single day. Because Kirkwood’s nine local historic districts trigger Landmarks Commission design review for exterior changes, we specify low-gloss matte Galvalume or a dark bronze Kynar coating that reads as period-appropriate metal from the sidewalk. Mature tree canopy along tree-lined streets makes moss and granule wash a real asphalt problem on north slopes — steel doesn’t host algae or shed granules, so those streaked north faces disappear for good.
Every metal roofing project moves through the same five checkpoints, so you always know what happens next and who owns it. Here is how a standing seam job runs from your first phone call to the final walk-through on a Kirkwood home.
We climb your roof, measure every plane, and shoot valleys, flashing, and eaves. You get a written scope of what field, decking, and trim need. Nothing is priced until we walk it.
We hand you real 24-gauge samples in matte black, bronze, and Galvalume finishes. You compare them against your siding, trim, and roofline. Landmarks homes get pre-vetted picks.
You get a line-item quote covering tear-off, new decking if needed, ice and water shield, panels, and trim. No verbal add-ons show up later. Financing options are laid out too.
We pull your Kirkwood building permit through the Public Portal and stage the job for weather. Tear-off, dry-in, and the panel run usually wrap in two to four working days on site.
We hoist you up or send drone footage so you see every seam, ridge, and valley up close. Warranty paperwork is signed on site. Your first free courtesy inspection gets booked.
Top Quality Exteriors was founded in 2022, and the crew leads carrying panels up your ladder bring over seven years of industry experience each — metal work is not a skill you fake. Our 52-plus team installs standing seam and snap-lock across the metro, but Kirkwood is where the material earns its price: multi-gable Victorians want mechanical-lock seams and copper flashing accents, while the Craigwoods mid-century belt rewards long unbroken snap-lock runs.
We are BBB Accredited with an A+ rating, licensed in Missouri and Illinois, and covered for general liability and workers’ compensation, so nothing about the crew on your Landmarks-review home is improvised. Every metal project ships with our 36-month workmanship warranty on top of the panel finish and substrate warranties, and select systems qualify for lifetime coverage. Compare that with asphalt shingles in Kirkwood and the long-run value math shifts fast.
Real numbers first: a residential standing seam metal roof runs $6.10 to $13 per square foot installed in the St. Louis metro, which lands most Kirkwood homes between $12,000 and $26,000 depending on complexity, and can push toward $33,000 on a large historic home with turrets, multiple valleys, and copper flashing accents. That is roughly two to three times the cost of an asphalt shingle tear-off, but panels outlast that shingle by 30 years.
The math changes when you count re-roofs avoided: two asphalt tear-offs at today’s prices plus disposal easily catch and pass a single metal install by year 35. Add insurance-friendly Class 4 impact ratings that often earn premium discounts, plus the resale premium a metal roof commands on a Kirkwood historic home. If cost is tight, our slate roofing in Kirkwood page covers the other premium option, and Hearth and GreenSky financing spread the payments out.
Every credential we carry is a commitment to quality, safety, and your peace of mind — on every project, in every state we serve.
